As a homeowner, having a sagging roof can be a safety hazard, as well as greatly diminishing the value of your home. Leaving a roof sagged can quickly get out of hand can result in additional damages and eventually your home being condemned, leaving you to spend tens of thousands of dollars on expensive repairs. From the moment that you recognize that the roof of your home is sagging, it is important that you begin the repair process. Luckily, repairing a sagging roof is much easier than you think, once you are able to identify the main problem. By following the process, you can identify the problem, repair the issues, and fix the sagging in your roof relatively quickly. It is important that you hire someone who is well trusted and has a lot of positive feedback from neighbors and family. For instance, Joe Hall Roofing is highly recommended by families across the country.
Identify the Reason
There are typically a few different reasons why a roof begins to sag. The first, and most obvious reason, is that the materials used to build the roof have been damaged over time. Leaks in the roof can cause beams and other wood materials to become water damaged, and the general weight of the roof can sometimes be too much for the materials to handle. This, along with faulty equipment and materials are the most common reasons for a sagging roof. Oftentimes, a sagging roof does not result in functional problems, but can diminish the value of the home.
Check All Beams
Check all of the beams in your roof. By looking at the roof, and identifying where it is sagging, you should be able to quickly identify where the problem areas are, but do not let that stop you from checking the health of the entire roof. Although rotted beams are typically the most common reason for a sagging roof, other damage to the roof can cause this as well. If small issues or damage are spotted that may become problems in the future, fixing them right away can save you a lot of money and time in the long run. Make sure that none of the beams are infested with termites, or have water damage. When inspecting the roof, you will need equipment such as scaffolding planks and ladders in order to properly inspect the entirety of the roof.
Buy Replacement Beams and Wood
Once you have identified the problematic beams that are leading to the sagging roof, then you need to purchase replacement beams. Measure the length of the beams that are currently in the roof, and take pictures if need be. Most beams are going to utilize 2 x 6″ lumber. Double check that you have the correct lengths, and purchase the best replacement beams that you can find, to ensure long-lasting repairs. Also remember to check all areas of the roof, and not just focus on the beams. Purchase replacement materials for all faulty areas of the roof that you believe may be contributing to the sag.
Fix and Replace
Once you have identified the problematic areas where damage has occurred, resulting in the sagging roof, you must fix and replace these beams and wood materials. If you feel it is necessary, add additional support to areas of the roof if you believe that the roof is too heavy for the current design.
Depending on the cause and severity of the sagging roof, it can either be an anesthetic or a functional problem. Of course, if the sagging roof is resulting in a functionality problem, you want to take care of it as soon as possible before additional damage is done. If it is just causing anesthetic problem, you can take your time but should attempt to repair the damage as it can decrease the value of your home.
Author Bio: Charles Nelson works for Roofer 911 one of the leading roofing companies in the Northern Virginia area.